This Swirl Rhinestone Bow Transfer strip fits over a 3 inch 75mm grosgrain ribbon. The rhinestone strips are made with DMC hot fix stones, 73mm wide x 33cm long and are sold in pairs.
Unfortunately it seems the pattern does not sit well on a regular sized cheer bow. To make it fit you make have to remove part of the middle of the transfer. As such we have reduced the price by half until they are sold out.
Instructions to use these rhinestone transfers
Have your heat press (or Iron with steam turned off) set to 170 – 175 degrees Celsius.
Place ribbon flat on the base of the heat press or ironing board.
Peel off white backing sheet
All the rhinestones should be attached to the clear carrier sheet.
Place the rhinestone design on the ribbon.
Press for 20 to 25 seconds. If using an iron make sure you press each section for a similar length of time. You should use something between the iron and carrier sheet to prevent spot burning.
Rhinestone sheets are cold peel. This means you need to wait until the rhinestones are cool before trying to remove the carrier sheet.
Peel off the carrier sheet starting at one corner and smooth peel off at a slow pace.
Want to know the latest news from Sarah Lauren? Like us on Facebook!
Sarah Lauren has one of the best selections tp buy ribbon online in Australia.